Common Sliding Door Problems and Their Solutions

Sliding glass doors are modern and minimalistic, and tracks support these sliding panels or
doors. The sliding feature adds a sense of playfulness and practicality, and they are usually
simple to fix if they break. They are becoming increasingly used in residential settings for these
reasons and more. Sliding doors can be found in various materials, including wood, glass,
fiberglass, aluminum, and steel. Significant variants of this classic design include barn doors,
bypass doors, and pocket sliding doors.
All sliding doors eventually deteriorate from normal use, wear and tear, grime, and the effects of
the environment. Increased use of sliding doors will result in increased wear and tear, as is the
case with any equipment.
The most typical sliding glass door repair Fort Lauderdale issues and their solutions are
detailed here:
Filthy Rollers:
The rollers are situated at the door's base and facilitate smooth movement down the track. The
rollers are dusty if opening and closing the door is a significant hassle.
If the rollers are unclean, you can use the narrow crevice tool with your vacuum to get rid of the
bulk of the dirt and grime. Use a moist paper towel to clean any remaining debris away after
Rusty or damaged Rollers:
Sliding glass door tracks can rust from the salt in the air. It's a complex operation to fix the roller.
Long-term exposure to ozone-polluted air degrades metal, paint, plastics, and rubber. It can
cause sliding glass door issues and can corrode rollers. If your glass door doesn't slide as
smoothly as it used to but isn't dirty, it probably has damaged rollers.

Both the fixed door and the moving glass must be taken down. After taking the door off its track,
you can unscrew the roller and replace it with a new one from the hardware shop. Re-mount the
sliding glass door after replacing the roller and set the wheel heights to the desired position.
After that, you can reinstall the stationary doors and lock them properly.
Wheels Require Balancing:
Rollers for sliding glass doors can fall out of whack after some time. Typical daily use is to
blame for such sort of wear and tear. When the rollers on a sliding glass door aren't working
correctly, the entire door can come flying off the track.
You may fix this by adjusting the screws at the bottom of the roller wheels. If you move the
screws clockwise, the door will rise. Turn the screws counterclockwise to release the door. Make
sure all sides of the sliding glass door are adjusted for a smooth operation.
Bowed Track:
A twisted mind prevents your glass door from sliding open. The door cannot move if the tracks
are twisted inward because they will pinch the roller. You risk accidentally pulling the door off
the track if the tracks are curved outward.
Use a pair of sturdy pliers to bend the track back into position for an inward bend. Grab a small
block of wood and a rubber mallet if the tracks are bent out. Put the wood block up against the
crooked track and gently hammer it back into place. However, continuously tap gently and
remove the door to avoid severe damage. The block of wood will spread the force of the blow
over a wider area.

Splintered Glass:
A shattered pane of glass is not only a security risk but also an invitation to burglars. Hail; only
the strong wind breaks vinyl windows and sliding glass doors.
Removing the glass from the seal, cleaning up any other broken pieces, and properly fitting and
sealing a new window are all necessary steps in repairing the glass door. It's time-consuming,
potentially dangerous, and financially prohibitive if something goes wrong.